Back to the Mod Project

Invincashield is a product made by 3M. This product goes by other names, and/or is made by other brands (ie Stongard).
You can find some info on a MR2 Spyder specific installation here http://www.smiley.net/spyder/invinca.htm
It can be ordered at http://www.invinca-shield.com/

They currently do not make a "kit" for the MKII, so you have to special measure the pieces and cut/tailor them yourself.


- Tips

Installation prep is the key to a good install. In the first picture below, you can see some air bubbles trapped under the film. This is actually a particle of dirt that got under the film.


- Pics of Invincashield Installed (partially) on a MKII MR2


Note, this car is DIRTY, it was not installed this way. The kit was only installed on the headlights and top of the hood in these pictures.